Dometic MoBar300S Operating Manual page 28

MoBar300S, MoBar550S
9.3 Maintaining the mobile bar
A
NOTICE! Damage hazard
Observe especially when maintaining stainless steel:
• Do not leave any metallic objects (e.g. beverage cans) on the stainless steel surfaces
for a long period of time and remove corrosive food residues (cola, lemon juice,
tomatoes, wine, salt, etc.) as soon as possible to avoid contact corrosion of the sur-
faces.
I
NOTE
Condensation on glass door: When ambient humidity is above 65 % in 25 °C ambi-
ent temperature, moisture will condense on the glass door. This condensation disap-
pears when the humidity drops.
➤ Regularly inspect the device for any breaks or cracks that may have accumulated germs or dirt.
9.4 Long term storage and winterization
I
NOTE
• Cover stainless steel surfaces to protect them from contamination.
• When the protective cover (accessories) is used, place the cutting board on the
rotomolded ice basket to prevent water from accumulating and damaging the pro-
tective cover.
• Winterization is recommended when the lowest daily ambient temperature is
beneath 0 °C.
1. Switch off the device.
2. Unplug the device from the power supply.
3. Remove all contents.
4. Clean the device (see chapter "Cleaning the mobile bar" on page 27).
5. Maintain the device (see chapter "Maintaining the mobile bar" on page 28).
6. Apply a coat of car wax to the exterior surfaces to protect them from staining caused by moisture, dirt, and
debris that can accumulate on the surfaces during long term storage and winterization.
7. Air fully and ensure the device is totally dry before packing away.
8. Store the device in a well ventilated dry place.
EN
Cleaning and maintenance
28