Lenovo ThinkPad Z13 Gen 1 Hardware Maintenance Manual page 85

• Ensure that the connector is attached firmly.
Installation steps of trackpad
1. A trackpad jig might come with the trackpad which is used for fixing the location of the trackpad. Peel off
the adhesive tapes as shown by arrows
2 .
2. Install the trackpad as shown.
3. Adjust the angle of the trackpad and install.
4. Tighten the screws
1 , and attach the trackpad jig to the keyboard bezel assembly
5 as shown.
.
Chapter 8 Removing or replacing a FRU
79