Table of Contents
Advertisement
1）When the smart function is enabled, the temperature of the fresh food compartment is controlled at 5℃, and that of
the freezer compartment at- 18℃, so that foods can be stored in the best condition while the refrigerator is running
more efficiently and with better performance.
2）Enabling the Smart/Energy Saving function
Press the Function/Mode key to select Smart/Energy Saving until the corresponding icon gets flickering, and then
press the "OK" key within 5 seconds to validate the setting, with the icon of "Smart/Energy Saving" normally
On.
3）Exiting the Smart/Energy Saving function
◆
Under the smart/energy saving mode, press the Function/Mode key to select Smart/Energy Saving until the
corresponding icon gets flickering, and then press the "OK" key within 5 seconds to validate the setting, with
the icon of "Smart/Energy Saving" extinguished and the smart/energy saving function disabled.
◆
When the Fast Freeze/Quick Freezingfunction is enabled, the smart/energy saving function will be disabled
automatically.
1.4Child Lock
When the Child Lock function is enabled, the temperature and function are subjected to no change to prevent
maloperation.
1）
In case of no key operation within 3 minutes, the Child Lock function will be enabled automatically.
2）
Enabling/Exiting the Child Lock function manually
◆
Press and hold down the OK key for 3s, then the Child Lock function can be enabled/disabled.
1.5 Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped when any
key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted until the door is
closed.
1.6Power cut memory
In the case of power failure, the refrigerator will maintain the running state that is set before the power outage when the
power supply is restored.
1.7Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not be started immediately after it is powered on.
1.8 Fault alarm
In case E0, E1, E2, EH, or EC, etc. is displayed on the operation panel, it indicates fault with the refrigerator. Please
contact the aftersales person for visiting service in such case.
Advertisement
Table of Contents
