Functions - New World NWSBS525B Instruction Manual

After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2.
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3.
Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4.
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user's temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage
circuit breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the
wall gets blackened by air convection around the compressor, move the refrigerator away from the wall. Setting
up the refrigerator may cause jamming noise or image chaos to the mobile phone, fixed-line telephone, radio
receiver, television set surrounding it, so try to keep the refrigerator as far away as possible in such case.
IV.

Functions

The display panel is designed on the fridge door, illustrated as the figures below:
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated
for 5s. When all the doors are close, the display gets extinguished automatically if no key operation within 3 minutes.
When the display is off, it will light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display.
1.Functions
1.1 Temp. setting
1）Fridge temperature setting
Press the Fridge key to adjust the temperature of the fridge compartment to the expected temperature mode, and then
press the "OK" key within 5s to validate the setting, with the flickering of the current temperature setting stopped.
The fridge temperature setting cycles as following:
5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
'OF' represents the OFF state, and when the OF setting takes effect, the fridge will be shut off , with the icon "℃"
extinguished.
Be sure to take out all the foods in the fresh food compartment before setting this function.
2）Freezer temperature setting
Press the Freeze key to adjust the temperature of the freezer compartment to the expected temperature mode, and
then press the "OK" key within 5 seconds to validate the setting, with the flickering of the current temperature setting
stopped.
The freezer temperature setting cycles as following:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃；
1.2 Fast Freeze/Quick Freezing
1)When the Fast Freeze/Quick Freezing function is enabled, the icon of Fast-freeze/Quick Freezing gets illuminated,
with the indicator light of the freezer temperature off and the freezer temperature controlled at -32℃ automatically. After
26 hours of running, the Fast Freeze/Quick Freezing function gets exited. Cooling down the freezer temperature in a
rapid manner is beneficial to the prevention of food nutrition against lost and the preservation of freshness.
2) Enabling the Fast Freeze/Quick Freezing function
◆
Press the Function/Mode key to select Fast Freeze/Quick Freezing until the corresponding icon gets flickering,
and then press the "OK" key within 5 seconds to validate the setting, with the icon of "Fast-freeze/Quick
Freezing" normally On.
3) Exiting the Fast Freeze/Quick Freezing function
◆
After a cumulative running period of 26 hours, the Fast Freeze/Quick Freezing function will exit automatically.
Under the Fast Freeze/Quick Freezing mode, press the Function/Mode key to select Fast Freeze/Quick Freezing
until the corresponding icon gets flickering,and then press the "OK" key within 5 second to validate the setting, with
the icon of "Fast-freeze/Quick Freezing" extinguished and the fast-freezing function disabled.
◆
When the freezer temperature is adjusted, the function of Fast Freeze/Quick Freezing gets exited automatically.
◆
When the Smart/Energy Saving functionis enabled, the Fast Freeze/Quick Freezing function will be disabled
automatically.
1.3 Smart/Energy Saving