Performing A Hotsync ® Operation Via A Network - Samsung SPH-I500 Online User's Manual

Select the desired
3.
Select the application from the
4.
Click
5. Change
Select the desired changed information from the choices listed in the
6.
dialog box.
Choose the duration of the setting.
7.
To have the setting affect only the next HotSync operation, deselect
Set as Default
To have the setting remain permanently, click the
setting.
Click
8. Done
Performing a HotSync
When you use the Network HotSync software, you can take advantage of
the LAN and WAN connectivity available in many office environments.
The Network HotSync software allows you to perform a HotSync
operation by dialing in to a network or by using a cradle that is
connected to any computer on your LAN or WAN (provided that the
computer connected to the cradle also has the Network HotSync software
installed, your computer is on, and the HotSync Manager is running).
The Network HotSync software requires the following:
Your computer has TCP/IP support installed.
name from the list.
User
.
.
to activate the settings.
®
Operation via a Network
Section 2: Understanding Your Phone
list.
Conduit
2Q: Advanced HotSync 154
Set as Default