Samsung SGH-Z140 User Manual page 53

Menu functions
• Email profiles: select a network connection
profile to be used for sending and receiving
e-mails. You can also make or edit a profile.
p. 73
You cannot change e-mail profile settings
while an e-mail is being sent or retrieved.
• Email accounts: select an account to be used
and set up e-mail accounts. Press <Options>
and select Edit to access the following options:
Account name: enter a name for the currently
selected account.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
POP3 server/IMAP4 server: enter the IP
address or domain name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
IMAP4 retrieving option: (only for IMAP4
protocol): set whether the phone retrieves only
new messages or all messages.
Retrieving option: set which part of e-mails
the phone retrieves from the server.
50
Keep in server: leave the copies of e-mails in
the server after retrieving.
My Address: set your e-mail address.
User name: set the user name for POP3 or
IMAP4 server connection.
Password: set the password for POP3 or IMAP4
server connection.
Use SMTP Authentication: activate the SMTP
authentication.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: set the SMTP user name.
Password: set the SMTP password.
Voice mail
(Menu 5. .4)
You can change the number of the voicemail centre.
Push message
(Menu 5. .5)
You can determine whether or not your phone
receives push messages.
Broadcast
(Menu 5. .6)
Use this menu to change the settings for the
broadcast message service.
• Receive: enable or disable the reception of
broadcast messages.