Table of Contents
Advertisement
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type
• sounds made when you press a key, make an
error or receive a message
Note: When the phone is in the silent mode (see
page 30), you cannot change the sound
settings.
Ring Tone
(Menu 3.1)
This option allows you to select the required ring
melody.
You can choose between many different
melodies. Each time you select a melody, it is
played for a few seconds. If you have
downloaded any sounds from the Internet you
can view the list in this menu.
Ring Volume
(Menu 3.2)
This option allows you to adjust the ring volume
to one of five levels.
Use the
and
keys or the
the left side of the phone.
84
and
keys on
Alert Type
(Menu 3.3)
This option allows you to specify how you are to
be informed of any incoming calls.
The following options are available:
Light only: only the backlight is switched on;
the phone neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option (Menu
3.1); see page 84.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 3.4)
This option allows you to select the tone that the
keypad generates when you press a key.
You can select an option from several predefined
tones.
To turn off the sound, select Off.
Sound Settings
85
Advertisement
Table of Contents
