Steps
1. Disconnect the data and power cables from the hard drive.
2. Press the release tabs on the hard-drive carrier and slide the hard-drive carrier out of the hard-drive cage.
3. Pry the hard-drive carrier to release the tabs on the carrier from the slots on the hard drive.
4. Lift the hard drive off the hard-drive carrier.
NOTE:
Note the orientation of the hard drive so that you can replace it correctly.
Removing the 2.5-inch hard-drive(s)
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5 in. hard-drive
About this task
The following images indicate the location of the hard drive and provide a visual representation of the removal procedure.
Before working inside your
assembly.
computer.
Removing and installing Customer Replaceable Units (CRUs)
55