•
User ID: enter your e-mail ID.
•
Password: enter your e-mail password.
•
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
•
SMTP port: enter the SMTP port number.
•
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
The following options are available when the
protocol type is POP3:
•
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
•
POP3 port: enter the POP3 port number.
•
APOP login: connect to the server by using
the APOP login scheme when this option is
selected.
These options are available when the protocol type
is IMAP4:
•
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
•
IMAP4 port: enter the IMAP4 port number.
•
Include attachments: select this option to
receive attachments with e-mails.
•
Max retrieve Email: set the number of
headers you will retrieve from the server.
•
Email profile: configure the network settings
required to send or receive e-mails.
Current profile: select a profile.
Profile settings: configure up to six e-mail
profiles.
- Profile name: enter a profile name.
- APN: enter the access point name.
- Login ID: enter user ID.
- Password: enter the password.
- DNS1: enter the primary DNS address.
- DNS2: enter the secondary DNS address.
Push message
(Menu 5.5.4)
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
61