Honda CRF50F 2009 Owner's Manual page 74

Engine Oil
8. Remove the old sealing washer ( ) and
install a new sealing washer on the drain bolt.
9. Install the oil drain bolt and tighten to the
specified torque:
18 lbf·ft (24 N·m , 2.5 kgf·m)
10. Pour the recommended oil into the crankcase,
approximately:
0.6 US qt (0.6 )
11. Install the oil filler cap/dipstick securely.
12. Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
66
Servicing Your Honda
2 13. With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page
the upper level mark. (Do not overfill.)
14. Check for oil leaks.
63 ) until it reaches