Installation
1.
Reverse the removal procedure. Make sure
the lug ( ) on the fork leg is located in the
5
slot ( ) in the brake panel.
6
2.
Torque the front axle nut to:
35 lbf·ft (46 N·m , 4.8 kgf·m)
3.
Check front brake adjustment (page
If a torque wrench was not used to install the
wheel, see your Honda dealer as soon as
possible to verify proper assembly. Improper
assembly may lead to loss of braking capacity.
86
).
Wheels
Servicing Your Honda
93