Samsung SCH-a990 Series User Manual page 46

a990.book Page 46 Wednesday, February 22, 2006 4:37 PM
4. "Say the Name or Number" plays through the earpiece.
5. To use Digit Dialing, say the area code and number that
you want to dial into the microphone, clearly and
naturally.
6. The number that you said is repeated through the
earpiece and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You're asked to confirm the correct number as
VoiceSignal displays the results. Say "Yes" or "No" to
confirm or reject the number when prompted.
Name Lookup
To perform a name lookup, you'll need to have some
entries in your Contacts list.
1. In standby mode, press the
2. A list of commands appears in the display and the audio
prompt "Say a command" plays through the earpiece or
speakerphone--if it is enabled.
3. Say "Lookup" at a distance of 3-12 inches from the
microphone. "Say the name" plays through the earpiece
or speakerphone.
4. Say the name exactly as it is displayed in your Contacts
list, first name followed by last name.
5. The contact name appears in the display with other
information that you've entered for that contact.
46
key.