Outside Rearview Mirrors - Mitsubishi Outlander 2017 Owner's Manual

Outside rearview mirrors

NOTE
 If you want to stop automatic mode, press
the switch (3) for approximately 2 seconds
and the indicator (1) will go off.
To return to automatic mode, press the
switch again or perform the following opera-
tion.
5
[Except for vehicles equipped with the Free-
hand Advanced Security
(F.A.S.T.-key)]
Turn the ignition switch to the "ON" position
after turning to "OFF" or "ACC" position.
[For vehicles equipped with the Free-hand
Advanced Security Transmitter (F.A.S.T.-
key)]
Put the operation mode in ON after putting
the operation mode in OFF.
5-60 Features and controls
Type 4
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Transmitter
Normally, use the automatic mode. When the
ignition switch is turned to the "ON" position
or the operation mode is put in ON, the green
indicator (1) illuminates and the reflection
factor of the mirror is automatically changed.
NOTE
 Do not hang items on, or spray glass cleaner
on the sensors (2), as reduced sensitivity
could result.
NOTE
 If you want to stop automatic mode, press
the switch (3) and the indicator will go off.
To return to automatic mode, press the
switch again or perform the following opera-
tion.
[Except for vehicles equipped with the Free-
hand Advanced Security
(F.A.S.T.-key)]
Turn the ignition switch to the "ON" position
after turning to "OFF" or "ACC" position.
[For vehicles equipped with the Free-hand
Advanced Security Transmitter (F.A.S.T.-
key)]
Put the operation mode in ON after putting
the operation mode in OFF.
Outside rearview mirrors
Adjust the outside rearview mirrors only after
making any seat adjustments so as to have a
clear view to the rear of the vehicle.
WARNING
 Do not attempt to adjust the outside rear-
view mirrors while driving. This can be
dangerous.
Be sure to adjust the mirrors before driv-
ing.
Transmitter
N00512201232