Samsung SCH-A562 User Manual page 10

G G e e t t t t i i n n g g S S t t a a r r t t e e d d
Charging the Battery
A desktop charger is provided with your phone. Use
only approved batteries and chargers. Ask your local
Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time.
The phone can be used while the battery is charging,
but this increases the time it takes to charge your
battery. To get the quickest charge for any battery,
turn the phone off.
To charge the battery using the desktop charger:
1. Plug the power cord of the desktop charger into a
standard AC outlet. When the power is connected
properly, the small lights, or LEDs on the charger,
flicker briefly and then turn off.
18
LEDs
2. Place the battery into the compartment of the
charger. Select one of the following two options:
• Place the phone with the battery attached into
the front compartment. The left LED on the
charger glows red.
• Insert a battery alone, not attached to the
phone, into the rear compartment. The right LED
on the charger glows red.
3. The color indication of the LEDs on the charger is
as listed below:
• Red: the battery is charging.
• Green: the battery is fully charged.
• Yellow: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
4. When charging is completed (the LED changes to
green), remove the battery or phone from the
charger and unplug the power cord of the charger
from the AC outlet.
G G e e t t t t i i n n g g S S t t a a r r t t e e d d
19