Bissell REWIND PREMIUM PET 44M3 Series User Manual page 14

M
aintenance and care
Maintaining pet turbobrush
the pet turbobrush should be checked
regularly for clogs or debris wrapping
around the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible,
unscrew the two screws on the back of the
TurboBrush to remove the faceplate and clear
any obstructions.
3. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4. Reposition the drive belt on the brush.
Place ends of brush in slots on sides.
Reposition faceplate and secure with
two screws.
note: this tool is designed to
remove pet hair from upholstered or
carpeted surfaces. it should not be
used on pets.
14
w w w . b i s s e l l . c o m
®
2.
8 0 0 . 2 3 7 . 7 6 9 1