Mitsubishi Electric XD360U-EST User Manual page 39

Advanced display utilities (continued)
LAN Display
You can project the computer images inputted via a
wired or wireless LAN.
You can also perform the following during the LAN
Display projection:
• 4-to-1 split screen projection
Images from up to 4 computers can be projected
split on 1 projector screen.
• Remote desktop
Connecting an input device such as a mouse or
keyboard to the USB-A terminal on the projector
enables the following computer operations from the
projector.
• Showing local files of the computer
• Operating the application software
• Showing server files on the network
• Browsing of the internet
To use the LAN Display function, you need to install
the software "LAN Display System" contained in the
attached CD-ROM.
Important:
• Supported OS's are Windows XP, Windows Vista
and Windows 7.
• Remote desktop cannot be performed during 4-to-
1 split screen projection and during wireless LAN
communication.
• Moving images cannot be displayed.
Installation of software
Installing LAN Display System
Before starting installation, be sure to read
"ReadMe(En).txt" contained in the CD-ROM. Copy
"LAN Display System.exe" contained in the TOOLS
folder of CD-ROM to the hard disk of your computer.
1. Double click "LAN Display System.exe", and start
up the installer of the LAN Display System.
2. The Setup window is displayed. Click [Next].
• Installation is started.
3. When the installation has been completed, LAN
Display System is automatically executed.
When deleting LAN Display System (Uninstallation)
Important:
• When uninstalling LAN Display System, it should
be ended in advance. If the application continues
operating, uninstallation cannot be performed
normally.
1. Select [Start]-[All Programs]-[LAN Display System]-
[Uninstall].
2. The LAN Display System Uninstall window is
displayed. Click [Yes].
• The uninstallation is started.
3. When the uninstallation has been completed, click
[OK].
• Logs and setting files are automatically deleted.
Connection
Connect the projector and the computer either by
using a commercially available LAN cable or USB
wireless LAN adapter.
AUDIO AUDIO IN-3L S-VIDEO SERIAL
IN-1
AUDIO OUT
AUDIO
IN-2 AUDIO IN-3R
MONITOR OUT
VIDEO
Important:
• For wired LAN connection, use a category-5 LAN
cable. Both straight-through and crossover cables
can be used.
• The USB-A terminal on this projector is compatible
with USB 2.0.
• Do not use a USB hub for the connection.
• Supported USB device is standard USB HID device
with power consumption less than 5V/500mA.
• Some USB wireless LAN adapters cannot be used
depending on the specifications.
• IP address, subnet mask, default gateway values
are the same for both wired LAN and wireless LAN.
• Data are not filtered between wired LAN and
wireless LAN interface.
EN-39
LAN cable
(option)
To LAN
terminal
COMPUTER / COMPONENT VIDEO
USB-A LAN
USB-B
IN-1
IN-2
To USB-A
terminal
USB wireless
LAN adapter
(option)
Computer
Computer