Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fortinet FortiNDR 1000F
Summary of Contents for Fortinet FortiNDR 1000F
- Page 1 QuickStart Guide QuickStart Guide FortiNDR 1000F FNR-1000F...
-
Page 2: Before You Begin
Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. -
Page 3: Package Contents
To access our Resource Center, Professional Services and Technical Support Services, visit https://www.fortinet.com/support 1x Ethernet Cable 1x Console Cable (USB to RJ45) Thank you for choosing Fortinet 2x Sliding Rails 4x Rubber Feet 2x Handles 2x HDD Keys 4X Sets of Screws (4x M4x6L, 2x M4x4L, 4x M5x20L, 8x #10-32x14.5) -
Page 4: Setup Options
Parity: None USB Console Cable Flow Control: None SFP+ Port 1 Console Port Management Computer Management Computer SFP+ to RJ45 Cable Note: For static IP configuration, use 192.168.1.1 with subnet mask Note: For a detailed CLI guide, visit docs.fortinet.com 255.255.255.0... -
Page 5: Rack Installation
The rack must be stabilized before sliding the unit out for servicing. Failure to stabilize may cause the rack to tip over. There are four steps to install the device into the rack: Electrostatic discharge (ESD) can damage your Fortinet equipment. Disassemble the rail assembly Attach the inner rails to the device... -
Page 6: Desktop Installation
Desktop Installation Install the outer rails on a rack Ensure that the right and left rails are correctly identified. 1.5in 1.5in Bracket Bracket Front Rear 1.5in 1.5in Note: Place the device on a flat, clean and stable surface. Press the front of the outer rail into three available screw holes on the front of the rack until you hear a click. - Page 7 Front FNR-1000F CONSOLE Port (RJ45) Power Button Blue: Power is on Off: Power is off Device Reset (G) USB Server Ports (x2) Factory Default Reset (F) NMI Button (N) disabled System Status (STA) Port 1 (SFP+) Green: Normal operation Management Port, IP 192.168.1.88 Red: Critical error Ports 2 &...
- Page 8 Rear FNR-1000F 2 3 4 System Fans (x4) Power Switch Grounding Screws System Reset Button Power Input (x2) Hot Swappable 100-240 VAC, 50/60 Hz, 10-5A Max Power Supply Status LED Green: Operating normally Amber: Overcurrent shutdown or no AC power; secondary PSU functioning Flashing Amber: Overcurrent detected;...
- Page 9 限用物質含有情況表 (RoHS Table) 請到以下 網址下載： There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. https://www.fortinet.com/bsmi Dispose batteries of according to the manufacturer’s instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion.
- Page 11 Fortinet.com...