Adding Commands To The Profile - Saitek Cyborg 3D User Manual

6 Finally, review the information offered on the Summary screen and click on Finish.
7 To view your new Profile within the 3D Windows® Explorer view, click on the new Profile and then on Saitek
Cyborg 3D Force.

Adding Commands to the Profile

Once you have created or imported a Profile for a game, you can add new commands to your buttons and controls by
using SST. This will allow you to personalize your Cyborg 3D Force for your exact gaming needs.
1 In the Explorer view you will now see a folder for the your new profile. Double-click on the folder and you will see it
open out to show 2 sub-folders - the Command List and Saitek Cyborg 3D Force.
2 Click on the folder called Saitek Cyborg 3D Force and a 3D model of the controller will appear on the screen.
3 If you place the mouse pointer on the 3D model and hold down the left mouse button, you can rotate the image.
4 Next, click on any control of the on-screen 3D image of Cyborg 3D Force. You will see that the control turns blue
(indicating that it is ready for programming) and that the text boxes at the bottom of the screen show its attributes.
5 The long bar at the bottom of the screen is the Command Editor. Simply click on and highlight the current
keyboard setting and replace it by pressing the new keyboard command. Hint: If you look in the manual that came
with your game, it will tell you what keyboard commands are associated with what actions in the game.
WARNING: the SST automatically saves the changes you make without the use of a save button. Therefore, if you
make a mistake, simply highlight the command line and retype the correct entry.