Advertisement
15 Make sure Bluetooth on your smartphone is
S7920
16 Switch on the shaver.
17 Open the app and follow the instructions to
18 Once paired, the shaver and app connect
Notification symbol
The shaver is equipped with a notification symbol.
The notification symbol lights up when there is an
important message for you in the app. When it
lights up, simply open the app on your smartphone
and follow the easy tips that the app gives you. If
you need further support, visit www.philips.com/
support.
Synchronize your shaves
When the data storage is almost full, the
notification symbol flashes. To prevent data loss,
synchronize the shaver with the app.
19 Make sure your phone is close to the shaver
20 The app connects automatically and
Unpair the shaver and smartphone
switched on.
start the pairing process.
automatically when the app is open and
Bluetooth on your phone is switched on.
This shaver stores your shave data so you don't need
to take your smartphone with you when you shave.
and open the app.
synchronizes your last shaves.
You can pair your shaver with only one smartphone
at a time. To unpair your shaver from your
smartphone (e.g. when you get a new smartphone),
follow these steps:
Unpair your shaver: Press and hold the on/off
button on the handle for approx. 10 seconds to
remove the bond between shaver and app.
38
English
Advertisement
