Onkyo TX-8050 Instruction Manual page 27

Listening to the Radio—continued
Displaying Radio Text (RT)
RT/PTY/TP
When tuned to an RDS station that's broadcasting text
information, the text can be displayed.
Press the [RT/PTY/TP] button once.
The RT information scrolls across the display.
Notes:
• The message "Waiting" may appear while the receiver
waits for the RT information.
• If the message "No Text Data" appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
PRESET ~/►
o
`o
® o 0-0
0
O 0 0
0 0 0 0 e
RT/PTYITP
ENTER
You can search for radio stations by type.
L_f
1 Press the [RT/PTY/TP] button twice.
The current program type appears on the display.
Z
Use the PRESET [']/[►] buttons to select
the type of program you want.
See the table on page 26.
3
To start the search, press [ENTER].
The receiver searches until it finds a station of the
type you specified, at which point it stops briefly
before continuing with the search.
4
When a station you want to listen to is
found, press [ENTER].
If no stations are found, the message "Not Found"
appears.
Listening to Traffic News (TP)
RT/PTY/TP ENTER
You can search for stations that broadcast traffic news.
1
Press the [RT/PTYITP] button three times.
If the current radio station is broadcasting TP
(Traffic Program), "[TP]" will appear on the display.
If "TP" without square brackets appears, this means
that the station is not broadcasting TP.
Z
To locate a station that is broadcasting TP,
press [ENTER].
The receiver searches until it finds a station that's
broadcasting TP.
If no stations are found, the message "Not Found"
appears.
En-27