D-Link DAP-1325 Quick Install Manual page 5

When the Status LED turns solid green (may take up to 3 minutes), this indicates
4
that your Range Extender is securely connected to your wireless router.
Note: If the Status LED on your Range Extender does not turn solid green
after running WPS setup, try resetting the unit (see Troubleshooting - What
if I forgot my Range Extender's Admin password or want to reset my Range
Extender?) and try WPS setup again. If it still does not turn solid green after
following all the steps, see Method Two: QRS Mobile Setup, on page 6.
Your setup is complete! You can now unplug and move your Range Extender
to a location between your wireless router and the area where you want wireless
coverage. By default, your Range Extender will share the same name and
password as your Router.
If after moving your Range Extender, the signal strength indicator is showing one single
amber bar or if your Range Extender LED does not turn solid green within 3 minutes,
move your Range Extender to a wall outlet closer to your wireless router.
Very Weak (1 x Amber)
Weak (1 x Green)
Good (2 x Green)
Strong (3 x Green)
DAP-1325 Install Guide
Signal Strength Indicator
5