Using The Uefi Utility (Uefi Hii); Uefi Hii Commands - HighPoint Rocket 700 Series User Manual

2. Under "Advanced->PCIe/PCI/PnP Configuration->, change "CPUx Slot x PCI-E OPROM" to "EFI". "x" represents the
PCIE slot assignment. For this example, the R720 is installed into "CPU1 Slot 2"
3. Reboot into the motherboard BIOS, "HighPoint RAID Management Utility" appears in the Advanced options.

4.2.2 Using the UEFI Utility (UEFI HII)

The following keys are utilized by the Rocket UEFI utility:
Arrow keys – Use these to move between different menu items.
Enter – Open the selected toolbar command/execute the selected command.
N or Esc – Move back to the previous menu, cancel the selected operation, or exit the BIOS Utility.

4.2.3 UEFI HII Commands

Create: This command is used to create the RAID array.
Delete: This command is used to delete the selected RAID array.
13