C
ONFIGURING THE
Port Advanced Setting
There are 8 advanced functions that can be configured in this page.
•
Volumn Gain control: Two modes are available. The fixed gain control
means the device is supported to supply a constant level of
amplification. The adaptive mode means a specified power level is
produced at the output during periods of active speech.
•
Jitter Buffer: Three jitter modes are available. The fixed mode, which
is the default mode, is a simple first in first out mode, with a fixed jitter
buffer delay. The adaptive mode optimizes the size of the jitter buffer
delay in response to network conditions. The sequential mode is also a
fixed jitter buffer delay mode, but in this mode the jitter buffer
function looks at the packet number for dropped or out of sequence
packet problems.
•
Jitter Buffer Delay: This parameter represents the delay in milliseconds
that the jitter buffer waits before it transmits the data samples that are
collected from the host processor to the CODEC.
•
Echo Canceller Delay: This is the function that filters out echoes
occurred during periods of active speech.
•
VAD (Voice Activity Detection): If this box is checked, only a certain
level of voice volume will be send out as voice packets. This function
is designed to save the bandwidth.
•
CNG (Comfort Noise Generation): Check this box to enable the
Comfort Noise Generation function. When no one is talking on a call
this feature will generate comfort noise in the background so you know
the call is active.
4-78
V
ADSL R
OICE
OUTER