Accessories; Installation; Removing The Top Cover - Alpine R2-A150M Owner's Manual

ACCESSORIES

• Self-Tapping Screw ..........................................................4
• Hexagon Wrench ......................................................1 SET

INSTALLATION

Due to the high power output of the R2-A150M
considerable heat is produced when the amplifier
is in operation. For this reason, the amplifier should
be mounted in a location which will allow for free
circulation of air, such as inside the trunk. For
alternate installation locations, please contact your
authorized Alpine dealer.
1. Using the amplifier as a template, mark the four
screw locations.
2. Make sure there are no objects behind the
surface that may become damaged during
drilling.
3. Drill the screw holes.
4. Position the R2-A150M over the screw holes, and
secure with four self-tapping screws.
Self-Tapping Screws (× 4)
(included)
Holes (× 4)
REMOVING THE TOP
COVER
To use the top inner panel, remove the top cover.
Top cover
Hexagon wrench
(included)
3
-EN