Delay Start; Memory; Child Lock - Samsung SW80SP User Manual

setting up your washer

Delay Start

Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1. Press the Power button to turn the washer "On".
2. Press the Delay Start button once.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3. Press the Start/Pause button and add the appropriate amount of detergent into the detergent drawer.
4. Close the lid. The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
•
•
•

Memory

Use this program to create your very own favorite or frequently used programs and store them in
the washer so that you can select them at any time.
1. Press the Power button to turn the washer "On".
2. Press the Memory button.
3. Select your frequently used functions.
Select Wash, Rinse or Spin according to your requirements.
4. Press the Start/Pause button to store them.
5. Add detergent and softener according to the water level and close the lid.
•
•

Child Lock

This function is for protecting children, the elderly and the frail.
1. Press the Power button.
2. To activate the Child Lock function, press and hold both the Rinse and Spin buttons down
simultaneously for 3 seconds. (If the Child Lock function is activated, the Child Lock icon blinks.)
3. Operations after activating the Child Lock function.
•
•
•
4. To deactivate the Child Lock function, press and hold both the Rinse and Spin buttons simultaneously
for 3 seconds again. (If the Child Lock function is deactivated, the Child Lock icon is turned off.)
5. To clear "CL" display, after draining is complete, close the door of the washing turn the
power off and then on.
-
CAUTION
-
-
-
-
-
14_setting up your washer
SW80SPW-02817A-02_EN.indd 14
Detergent must be added into the detergent drawer.
If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
To cancel a Delay Start, press the Power button.
If you select the Memory button after turning the washer "On", the stored settings are
automatically retrieved.
To change the stored settings, select the Memory button, reconfigure the settings and
then press the Start/Pause button. Then, the changes are stored.
Even if the Child Lock function is activated, every button works until the door opens.
When you open the door during the Child Lock is being activated, the alarm sounds
and an error message appears. In 30 seconds, draining begins automatically. However,
if you close the door within 30 seconds, water will not be drained. (Displayed error
message " CL", " dE ").
To add laundry after activating the Child Lock function, you must deactivate the Child
Lock function.
This function is for preventing injury and malfunction of the product because of
inappropriate operations or actions by children, the elderly or the frail.
If the door opens when the Child Lock function is activated, the water is drained by
force to prevent children from drowning.
To add laundry after activating the Child Lock function, you must deactivate the Child Lock.
Even if the power is turned off and then on when the Click Lock is activated, the Child
Lock remains activated.
Once Child Lock is activated, even when the power is turned off, if the door is opened,
water is automatically drained in 30 seconds.
The Child Lock function cannot be deactivated when CL is displayed. (However, the
Child Lock function can be deactivated when the dE error is displayed.)
2010-10-08 ¿ÀÈÄ 2:26:01