Resetting The Trip Meter; Show Trip Statistics In The Centre Display - Volvo XC90 TWIN ENGINE 2019 Owner's Manual

Resetting the trip meter

Reset the trip meter using the left-hand stalk
switch.
Reset all information in trip meter TM (i.e.
–
mileage, average consumption, average
speed and driving time) with a long press
on the RESET button on the left-hand
stalk switch.
Pressing the RESET button resets only
the mileage.
The trip meter TA can only be reset automati-
cally when the car has not been used for four
or more hours.
Related information
Trip computer (p. 92)
•
2 The figure is schematic - parts may vary depending on car model.
3 Applicable to fuel-driven auxiliary heater.
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and
provide an overview that facilitates more fuel-
efficient driving.
Driver
Open the
performance
view in order to show the trip
statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The bars are filled
in from the right as driving progresses. The bar
on the far right shows the value for the current
distance.
The average fuel consumption and total driv-
ing time are calculated since the last time the
trip statistics were reset.
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is
"net" consumption, i.e. energy consumed
minus regenerated energy created during
braking.
app in app
Trip statistics from the trip computer
NOTE
When driving with electric operation, fuel
consumption can be indicated in the trip
statistics if the additional heater
ning.
Related information
Settings for trip statistics (p. 96)
•
Trip computer (p. 92)
•
DISPLAYS AND VOICE CONTROL
2
.
3
is run-
95