SMC Networks Barricade SMC7904BRB2 User Manual page 69
4-port adsl2/ 2+ modem router
Hide thumbs
Also See for Barricade SMC7904BRB2:
- Quick installation manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Parameter
Lease Time
IP Address Pool
Start IP Address
End IP Address
Domain Name
VLAN
The Barricade's VLAN function can be used to create up to 4 VLAN
profiles. Once a VLAN profile is created interfaces can be assigned to the
VLAN profile. This is done by setting the VLAN binding.
Notes: Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and
1483 Bridging PVC's) can be assigned to a VLAN.
Click Add VLAN to create a profile.
Description
Allows you to select a pre-defined lease time for IP
addresses assigned using DHCP. For home networks this
may be set to Forever, which means there is no time limit
on the IP address lease.
Specify the start IP address of the DHCP pool. Do not
include the gateway address of the Barricade in the client
address pool. If you change the pool range, make sure the
first three octets match the gateway's IP address, i.e.,
192.168.2.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here.
Otherwise, leave this field blank.
C
ONFIGURATION PARAMETERS
4-31
Advertisement
Table of Contents
