Table of Contents
Advertisement
Cleaning Brush 105749
For use in cleaning gun
Lubricant 111265
One 4 oz. (113 gram) tube sanitary (non-silicone)
lubricant for fluid seals and wear areas.
Air Caps
See page 6.
Air Whip Hose Assembly 239631
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
Eases gun movement with increased hose flexibility.
4 ft. (1.22 m) long, 5/16 in. (7.94 mm) I.D., 1/4 npsm(f)
swivel, nitrile
Air Hose Assembly
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
5/16 in. (7.94 mm) I.D., 1/4 npsm(f) swivel, nitrile
Part No.
239636
239637
Fluid Whip Hose Assembly 239622
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
Eases gun movement with increased hose flexibility.
4 ft. (1.22 m) long, 3/16 in. (4.76 mm) I.D.,
3/8 npsm(fbe), nylon with polyurethane cover
Whip Hose Parts Breakdown
Part No.
Description
239630
FITTING ASSY, male
239629
FITTING ASSY, swivel
061345
TUBING; 1000 ft. (305 m) roll
Fluid Hose Assembly
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
3/16 in. (4.76 mm) I.D., 3/8 npsm(fbe), nylon with
polyurethane cover
Part No.
239633
239634
Fluid Hose Parts Breakdown
Part No.
Description
239629
FITTING ASSY, swivel
061345
TUBING; 1000 ft. (305 m) roll
30
308742
Accessories
Length
15 ft. (4.58 m)
25 ft. (7.63 m)
Length
15 ft. (4.58 m)
25 ft. (7.63 m)
Gun Air Regulator Assy. 235119
0–100 psi (0–0.7 MPa, 0–7 bar) air
regulator to control air pressure to
gun
NOTE: Installing the gun air regula-
tor adds a pressure drop that could
limit the air cap pressure.
Gravity Cup
For use with gravity feed gun.
Nylon cup, 304 stainless steel 3/8
npsm(f) fluid inlet fitting, fluid filter
cartridge included.
Part No.
239714
239715
Gravity Cup Holder Bracket 192407
Fits both gravity cup sizes.
Siphon Cup
304 stainless steel cup.
Part No.
239582
239584
Disposable Polyethylene Cup Liners
Paint and solvent resistant. 40 liners per box.
112490
1 Quart Cup Size
112491
2 Quart Cup Size
Air Control Valve 243670
Install on the gun air inlet to control both the atomizing
air and the pressure in the spray gun cup (if used). 1/4
npsm x 1/4–19 BSPT.
Air Spray to HVLP Conversion Kit 239587
For converting an air spray gun to a HVLP spray gun.
Includes the HVLP fan valve and spray housing. The
appropriate needle, HVLP nozzle, and HVLP air cap
must be ordered separately.
Non–Swiveling Air Inlet Fitting 195065
Replaces the standard gun swivel fitting to prevent gun
from rotating during operation.
7614A
7636A
Size
16 oz. (474 cc)
8 oz. (237 cc)
7619A
Size
1 qt. (0.95 liter)
1 pt. (0.48 liter)
Advertisement
Table of Contents
