Watchguard XTM 5 Series Hardware Manual page 23

In normal mode, the tree view menu includes these menu items:
Hardware Monitor
XTM 5 Series device model number
XTM 5 Series device serial number
CPU temperature
CPU temperature and the system temperature
CPU fan status
Case cooling fan speeds for the three device fans
Voltage
CPU core voltage, the battery voltage, and the 3.3V power supply voltage
Configuration Information
IP addresses and subnet masks assigned to the each interface on the device
Default gateway
Appliance Software Information
OS type
Fireware XTM build number
Uptime
Time interval since the device was last restarted
Time interval since a configuration was saved to the device
Load
Load average, shows the average system load for the past 1, 5, and 15 minutes
Memory usage
Current memory use on the XTM 5 Series device.
To navigate the tree view menu:
To move forward through the list of categories, press the Right Arrow button.
To move up and down in the menu and see information in a category, press the Up Arrow and Down
Arrow buttons.
To stop the auto-cycle of the LCD screen, press any button.
Example
To see the CPU temperature of the XTM 5 Series device on your LCD screen:
1. Press the Right Arrow button to scroll through options until Hardware Monitor appears.
2. Press the Down Arrow button to enter the tree view.
3. Press the Right Arrow button to scroll through the items in the Hardware Monitor menu until
CPU temperature appears.
4. Press the Up Arrow button to return to the main category level.
Hardware Guide
Hardware Specifications
9