Confirming The System Configuration; V460-H Series System Configuration - Omron V460-H Communications Manual

1 Communication Specifications Overview
1-1

Confirming the System Configuration

This product is a multi-code reader that captures images of 1D symbols (barcodes) and 2D Symbols
and reads and processes their embedded data.
In a system configuration in which it is connected to a PLC, PC, or other external device, serial com-
mands can be received from, and code reading results can be output to the external device.
1-1-1

V460-H Series System Configuration

The V460-H can be used in the following types of system configurations.
Connecting over Ethernet (EtherNet/IP, Serial (TCP), PROFINET)
Establish network connections via an Ethernet cable to input triggers and communication commands
and to output reading results (Judgment results and decoded content). Using the data link function for
each network (excluding Serial), data transfer can be done periodically between the code reader and
the external device.
Basic configuration
V460-H Handheld
DPM Reader
Ethernet cable
V430-WE-_M
Switching hub for
EtherNet/IP
(Industrial Ethernet)
PLC / Controller
*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
NOTE: Once the reader is connected, If the Ethernet cable (PoE injector to PLC/Controller) will be un-
plugged (on either side), the reader will start beeping to notify the user.
1-2
PoE Injector
V460-AP0
Ethernet cable
XS6W-5PUR8SS_CM-G
Ethernet cable
XS6W-5PUR8SS_CM-G
Ethernet cable
XS6W-5PUR8SS_CM-G
V460-H Industrial Handheld DPM Reader Communication Manual (Z462-E1)
Optional Items
PC
*1 *1