Interface; Operator Interface; Control Switch - A.O. Smith Innovo IR 12-160 Installation, User And Service Manual

3
3.1
3.1.1
w
0312266_INNOVO_UKUK_V5.1, 2022-07-12

Interface

Operator interface

The operator interface consists of:
• a control switch (see 3.1.1) on the left side of the water heater
• 5 push buttons (see 3.1.2) to navigate through the menu
• a LCD-display (see 3.1.3) that shows settings, functions, values and errors.
The operator interface is parameter driven and enables the user to change parameters and
to verify the status and history of the water heater.
Fig. Operator interface
EXT
menu
1

Control Switch

With the control switch you can activate and deactivate the controller of the water heater.
Warning
The power of the water heater stays on when the control switch is set to 0.
When the control switch is set to I, the display first shows ini for some seconds. After
that, the display shows OFF.
Fig. Display
Innovo
enter reset
2
1. LCD display
2. Push buttons
19