Table of Contents
Advertisement
Glossary-6
Term
real-time clock
receiver
registers
repeater
repeater/talkaround
RESET
RF
RF PA
ROM
RPCIC
RPT/TA
RS232
RSS
RTC
RX
RX DATA
SAP
SCI IN
Serial Audio CODEC
Port
Serial
Communication
Interface Input Line
SCI IN
Serial Peripheral
Interface
March 23, 2006
A module that keeps track of elapsed time even when a computer is
turned off.
Electronic device that amplifies RF signals. A receiver separates the
audio signal from the RF carrier, amplifies it, and converts it back to the
original sound waves.
Short-term data-storage circuits within the microcontroller unit or
programmable logic IC.
Remote transmit/receive facility that re-transmits received signals in
order to improve communications range and coverage (conventional
operation).
A conventional radio feature that permits communication through a
receive/transmit facility, which re-transmits received signals in order to
improve communication range and coverage.
Reset line: an input to the microcontroller that restarts execution.
See radio frequency.
See radio frequency power amplifier.
See read-only memory.
Regulator/power control IC.
See repeater/talkaround.
A common interface standard for data communications equipment.
See Radio Service Software.
See real-time clock.
Receive.
Recovered digital data line.
See Serial Audio CODEC Port.
Serial Communications Interface Input line.
SSI to and from the GCAP II IC CODEC used to transfer transmit and
receive audio data.
A full-duplex (receiver/transmitter) asynchronous serial interface.
See Serial Communication Interface Input Line.
How the microcontroller communicates to modules and ICs through the
CLOCK and DATA lines.
Definition
6816812H01
Advertisement
Table of Contents
