Putting The Mkh 8060 Into Operation; Connecting The Microphone; Attaching The Microphone - Sennheiser MKH 8060 Instruction Manual

Putting the MKH 8060 into operation

Connecting the microphone

Connection data of the MKH 8060:
• 48 V ±4 V phantom powering (P48, as per IEC 61938)
• XLR-3 connector, balanced
To connect the MKH 8060 to a mixing console or recording device:
f Connect the socket of the microphone cable to the microphone.
f Connect the connector of the microphone cable to the mixing console or
recording device.

Attaching the microphone

f Select the suitable mounting thread:
• Without thread insert: 5/8" thread
• Thread insert: 3/8" thread
f Screw the microphone clamp
f Place the microphone with its back end into the microphone clamp: Make
sure that the lateral slots are
f Orient the microphone together with the microphone clamp and fix them by
screwing the wing screw tight.
4
Putting the MKH 8060 into operation
4 to a stand.
not covered.
MKH 8060