256
8-3. Panoramic view monitor
Area displayed on the screen
A
Parts of objects not displayed on the screen
B
Parts higher than the road do not appear on the screen.
●
The black parts around the vehicle icon are not displayed by the camera.
Visually check those areas.
●
As the images are obtained from four cameras are processed and dis-
played on the standard of a flat road surface, see-through view, moving
view, panoramic view (including zoomed display), side clearance view,
and cornering view may be displayed as follows:
• Objects may look collapsed; thinner or bigger than usual.
• An object with a higher position than the road surface may look further
away than it actually is or may not appear at all.
• Tall objects may appear protruding from the non-displayed areas of the
image.
●
Variations in the brightness of the image may appear for every camera
due to lighting conditions.
●
The displayed image may be misaligned due to inclination of the vehicle
body or change in vehicle height caused by the number of passengers,
vehicle load, and quantity of fuel.
●
If the doors are not completely closed, the image and the guide lines may
not be displayed correctly.
●
The positional relationship of the road surface and objects with the vehicle
icon displayed on see-through view, moving view, panoramic view (includ-
ing zoomed display), side clearance view, and cornering view may differ to
the actual positions.
●
Light from a back-lit license plate may appear on the screen.
●
Images indicated by [
areas may be difficult to see.
] in the figure are a composite, and hence some