Specifications - Runco Reflection CL-410 Brochure & Specs

Specifications

CL-410
Projector Type: Digital Light Processing (DLP™), Single-Chip DMD™
Native Resolution: 1024 x 576
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide™, Cinema,
Virtual Cinema™
Video Standards: NTSC, PAL, ATSC
DTV Compatibility: 480p, 720p, 1080i
Picture Size Recommended Width: 72 – 96 in.
(16:9 screens) Maximum Width: 150 in.
Throw Distance Zoom 1.37 – 1.67
(Factor x Screen Width)
(All CineWide Throws are
specified using a 2.35:1
screen)
Horizontal and Vertical Horizontal shift: ± 8%,
Offset Without CineWide Vertical shift: Up to 40% above screen center, up to 60%
below screen center
Option:
(Note: With CineWide
option offsets vary per
lens. Please contact Runco
Technical Support for more
information.)
CSMS™** Specifications:
Light Output:
Home Theater Calibration: 412 ANSI Lumens;
16 Foot-Lamberts (fL);
800 ANSI Lumens*
Contrast Ratio: CSMS** Contrast Ratio: 221:1; 2500:1
Lamp: 250W NSH
2000 hours
Lamp Life:
Inputs: (1) Video, (1) S-video, (2) Component,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232
12V Output: Max. 0.25 Amps, active when the
projector is on
Power Requirements: 100 – 240V AC, 50/60Hz, 370W
Operating 41 to 95ºF (5 to 35ºC);
Environments: 20-80% humidity (non-condensing)
Dimensions Width: 14 in. (356.00 mm)
(w/o feet): Depth: 16 7/8 in. (429.00 mm)
Height: 7 3/8 in. (188.00 mm)
Weight: 25lbs. (11.34kg)
Regulatory Approvals: Complies with FCC Class B, CE, C-Tick
Projector: (2) Two years parts and labor from the date of
Limited Warranty:
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
*ANSI Lumen specification:
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in
RUNCO literature to allow for direct comparison with other manufacturer's projectors. These measurements can be taken at 9,000
to 13,000º Kelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.
**CSMS Home Theater Calibration ANSI Lumen Specification:
These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF
specifications including setting the color temperature to 6500º Kelvin, the standard for reproducing video.
Specifications are subject to change without notice. Optional ceiling bracket available.
© 2007 Runco International. All rights reserved. Reflection, Enhanced GEN3, Vivix, Virtual Cinema, CSMS, CineWide, AutoScope, CinOptx, O-Path,
SLIC, Selectable Lamp Intensity Control, LiveLink, AxiShift, SuperOnyx and VirtualWide are trademarks of Runco International.
Digital Light Processing, DLP and DMD are trademarks of Texas Instruments.
ISF is a trademark of Imaging Science Foundation.
CinemaScope is a trademark of Twentieth Century Fox Film Corporation.
Theater installation photo courtesy of Electronics Design Group, Inc., Piscataway, NJ
CL-420
Digital Light Processing™ (DLP™) Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™ Single-Chip SuperOnyx™ DMD™
1280 x 720 (16:9) 1280 x 720 (16:9)
4:3, Letterbox, 16:9, Virtual Wide™, Cinema, 4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™ Virtual Cinema™
NTSC, PAL, ATSC NTSC, PAL, SECAM, ATSC
480p, 720p, 1080i 480p, 576p, 720p, 1080i
Recommended Width: 72-96 in. Recommended Width: 72-96 in.
Maximum Width: 150 in. Maximum Width: 200 in.
Zoom 1.40 – 1.70 CL-610 : Zoom 1.37 – 1.82
(with CineWide: 1.55 – 1.82)
CL-610LT : Zoom 1.87 – 2.47
(with CineWide: 1.87 – 2.47)
Horizontal shift: ± 8%, Lens is fixed
Vertical shift: Up to 46% above screen center, up to 63%
below screen center
CSMS** Specifications: CSMS** Specifications:
Home Theater Calibration: 421 ANSI Lumens; Home Theater Calibration: 395-526 ANSI Lumens;
16.3 Foot-Lamberts (fL) 12.3-19.3 Foot-Lamberts (fL)
850 ANSI Lumens 1150 ANSI Lumens
CSMS** Contrast Ratio: 228:1; 2600:1 CSMS** Contrast Ratio: 185:1-205:1; 1400:1-2200:1
250W 250W
2000 Hours 2000 Hours
(1) Video, (1) S-video, (2) Component, (1) Composite Video, (1) S-video,
(1) HDMI w/HDCP, (1) RGB DB15 (1) RS-232 (1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
Max. 0.25 Amps, active when the Max. 0.25 Amps, active when the
projector is on projector is on
100-240V AC, 50/60 Hz, 370W 100-240V AC, 50/60 Hz, 310W
41° - 95° F, (5° - 35° C), 41° - 95° F, (5° - 35° C),
0% - 90% Humidity (non-condensing) 20% - 80% Humidity (non-condensing)
Width: 14 in. (356.00 mm) Width: 16 1/2 in. (419.00 mm)
Depth: 16 7/8 in. (429.00 mm) Depth: 16 3/8 in. (416.00 mm)
Height: 7 3/8 in. (188.00 mm) Height w/feet: 6 1/8 in. (156.00 mm)
Weight: 25lbs. (11.34kg) Weight: 32 lbs. (14.6 kg) (includes lens)
Complies with FCC, CE, C-Tick Complies with FCC Class B, CE, C-Tick
Projector: (2) Two years parts and labor from the date of Projector: (2) Two years parts and labor from the date of
delivery to the end user. delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first. comes first.
**CSMS Home Theater Calibration foot-Lambert (fL) Specification:
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture
and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate
(without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema
theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130,
1.3 gain 72-inch wide screen. The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours
of usage.
CL-610/CL-610LT CL-810
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
1280 x 720 (16:9)
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
NTSC, PAL, SECAM, ATSC
480p, 576p, 720p, 1080i
Recommended Width: 72-96 in.
Maximum Width: 200 in.
1.80 to 2.38
(with CineWide: 1.90 – 2.38)
Lens is fixed horizontally
Vertical shift 50% up or down from screen center
CSMS Specifications:
Home Theater Calibration: 442-587 ANSI Lumens;
14.5-21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens
CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1
250W
2000 Hours
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
Max. 0.25 Amps, active when the
projector is on
100-240V AC, 50/60 Hz, 310W
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
Width: 19 5/8 in. (499.00 mm)
Depth: 17 5/8 in. (448.00 mm)
Height: 8 3/4 in. (222.00 mm)
Weight: 34 lbs. (15.42 kg) (includes lens)
Complies with FCC Class B, CE, C-Tick
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
Engineered for ISF calibration.
®
CL-810 Ultra
Digital Light Processing™ (DLP™)
Single-Chip SuperOnyx™ DMD™
1280 x 720 (16:9)
4:3, Letterbox, 16:9, Virtual Wide™, Cinema,
Virtual Cinema™
NTSC, PAL, SECAM, ATSC
480p, 720p, 1080i
Recommended Width: 72–96 in
Maximum Width: 200 in.
Proteus Lens Options:
E: Zoom 2.42 – 3.57
A: Fixed 0.67 (for rear-
(with CineWide
screen
1.82 – 2.67)
applications)
F: Zoom 3.65 – 5.68
B: Zoom 1.22 – 1.44
(with CineWide
C: Zoom 1.45 – 1.75
2.76 – 4.25)
D: Zoom 1.82 – 2.38
(with CineWide (Proteus A, B or C options not
available with CineWide or
1.38 – 1.77)
CineWide w/AutoScope)
Horizontal 13% of screen width left or right
Vertical (ceiling mount)
Up to 71% above screen center, up to 13% below screen
center (depending on lens)
Vertical (floor mount)
Up to 13% above screen center, up to 71% below screen
center (depending on lens )
CSMS Specifications:
Home Theater Calibration: 442–587 ANSI Lumens;
14.5–21.6 Foot-Lamberts (fL)
†Variable depending on RVR calibration;
1250 ANSI Lumens
CSMS** Contrast Ratio: 200:1-220:1; 1500:1-3100:1
250W
2000 Hours
(1) Composite Video, (1) S-video,
(1) RGB/Component (via BNC),
(1) Component (via RCA), (1) HDMI,
(1) RS-232
Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (CL-810 Ultra/CineWide with
AutoScope only) or when projector is on
100-240V AC, 50/60 Hz, 310W
41° - 95° F, (5° - 35° C),
20% - 80% Humidity (non-condensing)
Width: 19 5/8 in. (499.00 mm)
Depth: 22 in. (559.00 mm)
Height: 8 7/8 in. (226.00 mm)
Weight: 36 lbs. (16.32 kg) (includes lens)
Complies with FCC Class B, CE, C-Tick
Projector: (2) Two years parts and labor from the date of
delivery to the end user.
Lamp Warranty: 1000 hours or (6) Six months, which ever
comes first.
2900 Faber Street, Union City CA 94587
Tel: 510-324-7777 • Fax: 510-324-9300
www.runco.com
03/07