Board-To-Board Cabling; Figure 4-3. Direct Connection Between A Tio-10 Board And The Sc-2072 Board; Figure 4-4. Connection Between A Dio-24 Board And The Sc-2072 Board Via The Sc-2051 Board - National Instruments SC-207 Series User Manual

SC-2072 Board

Board-to-Board Cabling

The SC-2072 board connects directly to all NB Series, MC Series, PC Series, AT Series,
Lab/1200 Series, and the PC-OPDIO-96 DAQ, digital I/O, and timing devices (except for the
NB-A2000 and the EISA-A2000), and some DAQCards. The various expansion devices connect
to the SC-2072 board as shown in Figure 4-3.
TIO-10

Figure 4-3. Direct Connection between a TIO-10 Board and the SC-2072 Board

If you want any signal conditioning of the digital I/O ports with the National Instruments
SC-206X Series boards, you can use an SC-205X Series cable adapter board. The SC-2050 can
be used with any MIO-16. The SC-2051 can be used with any DIO -24 or with a PC-DIO-96 that
is equipped with a PC-DIO-96 to DIO-24 converter. The SC-2052 can be used with any
DIO-32F. The SC-2053 can be used with either the Lab-NB, the Lab-LC, the Lab-PC, or the
Lab-PC+. Figure 4-4 shows a connection using the SC-2051 cable adapter board.
DIO-24
Figure 4-4. Connection between a DIO-24 Board and the SC-2072 Board
Warning: Do not connect the SC-2072 board to any board other than a National
Instruments DAQ device or a National Instruments SC-205X Series cable adapter
board. The SC-2072 board is not compatible with any other DAQ devices or cable
adapter boards. Attempts to use the SC-2072 board with products for which it is
not intended can result in damage to the SC-2072 board, the DAQ device, or the
host computer. National Instruments is
these connections.
The SC-2072 board uses a 50-pin ribbon cable connector to connect to the 50 -pin I/O connector
on either a DAQ device or an SC-205X Series cable adapter board. If the SC-205X Series cable
adapter board is being used, the SC-2050 connects to the DAQ device with a 50-conductor
ribbon cable. The SC-2072 board then connects to the other 50-pin I/O connector on the
SC-205X Series board. For more information, see Chapter 5, Installation and Connections.
SC-207X Series User Manual
50-Pin I/O Connectors
50-Conductor cable
50-Conductor Cable
Digital I/O
SC-2051
26-Conductor Cable
via the SC-2051 Board
NOT
4-6
SC-2072
SC-2072
SC-206X Series
or
8-channel SSR
liable for damages resulting from
© National Instruments Corporation
Chapter 4