Brother 888-E44 Operation Manual page 89

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Raise the presser foot using the presser foot
d
lever.
a Presser foot lever
• If the presser foot is not raised, the sewing
machine cannot be threaded correctly.
Raise the needle by turning the handwheel
e
toward you (counterclockwise) so that the
mark on the wheel points up, or press
(needle position button) (for models
equipped with the needle position button)
once or twice to raise the needle.
a Mark
b Needle position button
Pull some thread off the spool, and then pass
f
the thread under the thread guide.
a Thread guide
or
Pass the thread under the thread guide cover
g
from the back to the front.
Hold the thread with your right hand so that
there is no slack in the thread that is pulled out,
and then pass the thread under the thread
guide cover with your left hand.
a Thread guide cover
Feed the upper thread as shown in the
h
illustration below.
4
87