Fisher-Price POWER WHEELS ARCTIC CAT L2170 Owner's Manual page 11

Dashboard Dashboard
9
10
FRONT VIEW
• Insert four screws through the dashboard and into the front
end of the vehicle. Tighten the screws with a short shaft
Phillips screwdriver.
Screws Screws
11
DASH VIEW
• First, insert a screw through each side of the vehicle and into
the ends of the windshield/dashboard. Tighten the screws.
• Next, insert two screws through the inside of the vehicle and
into the windshield/dashboard. Tighten the screws.
Screws
Screws Screws
Washers
Clip
Shovel
12 FRONT VIEW
• Using safety scissors, carefully cut the plastic tie holding the
shovel and clip together.
Note to Retailer: Do not cut the plastic tie. The plastic tie holds
the shovel in place for display purposes.
• Place the clip and shovel assembly onto the hood.
• First, slide a washer onto the remaining screws. Then, insert
the four screws with washers through the underside of the
hood and into the clip. Tighten the screws.
Hood Strap
13
SIDE VIEW
• Lift and lower the hood closed.
• Pull the hood strap down and over the button on each side of
the front end of the vehicle.
11
Screws
Hood
Button Button
L2170a-0922
Hood