Table of Contents
Advertisement
6.3 UN-VENTED SYSTEM
It is the law that all unvented hot water systems be installed by an approved installer.
If the Lochinvar LST is to be used in an unvented arrangement, the system should follow the guidance given in BS6700
and must comply with The Building Regulations: Part G3 in England and Wales, P5 in Northern Ireland and P3 in
Scotland. A kit of components that have been suitably sized for the unvented or boosted operation of the appliance is
available from Lochinvar Limited. For further information, contact Lochinvar Limited.
6.3.1
RECOMMENDED PIPEWORK FOR A NON-CONDENSING CIRCULATING APPLIANCE
6.3.1
RECOMMENDED PIPEWORK FOR A CONDENSING CIRCULATING APPLIANCE
10
Advertisement
Table of Contents
