Switches - Emerson IC695CPE330 Quick Start Manual

Quick Start Guide
GFK-2941K
signals are decoded by the PNS101 using either an IC695HSC304 or IC695HSC308
High Speed Counter Module. SoE recording is available in both simplex and
redundant PROFINET systems.
•
User may program in Ladder Diagram, Structured Text, Function Block Diagram, or
C.
•
Contains 64Mbytes of configurable data and program memory.
•
Supports auto-located Symbolic Variables that can use any amount of user
memory.
•
Reference tables include 32k bits for discrete %I and %Q and up to 32k words each
for analog %AI and %AQ. Bulk memory (%W) also supported for data exchanges.
•
Supports up to 768 program blocks. Maximum size for a block is 128KB.
•
For supported I/O, Communications, Motion, and Intelligent modules, refer to the
PACSystems RX3i System Manual, GFK-2314.
•
Ability to display serial number and date code in PME Device Information Details.
•
Coordinated Universal Time (UTC) and Day Light Savings Time (DST) support.
• Operating temperature range 0C to 60C (32 F to 140 F).
1.1.

Switches

The Run/Stop switch and RDSD UPLD and RDSD DNLD pushbuttons are located
behind the protective front door. Switch operation is given in the following table.
RDSD
Pushbuttons
RDSD UPLD
RDSD DNLD
Run/Stop
Switch Position
User Features
Function
Loads user program or data from CPU to RDSD.
Stores user program or data from RDSD to CPU.
A three-position switch which operates as follows:
CPU and Sweep Mode Memory Protection
Section 1
Sep 2019
4