Before You Begin; Update The Vm Console - Roland VE-7000 Owner's Manual

Before you begin

Update the VM Console

In order to connect the VE-7000 to a V-mixing console and use it as a
controller, the VM Console must be using system version 1.520 or higher
and VM processor must be using unit1 (and 2) version 1.500.
Use the following procedure to check the version of your VM Console.
Then, if necessary, perform the update as described in the following section
"Updating the VM Console system version."
The "VM-7000 update card" required for the update is included with the
VE-7000.
Notes when updating
The update procedure will erase all data from the project, library, and
system user areas, and will return the unit to the factory settings.
Before you perform the update, save any important data, and restore the
data after the update is completed.
Basic work flow
Check the version
restore your data
Update procedure
Check the version
1
Turn on the power of the VM Console and processor as usual.
2
Hold down [on Display], and press MEMORY/RECALL area
[9].
3
The current version will be displayed. Verify that unit1 (and 2)
in "System Version:" is 1.500 or higher.
4
When you press any button on the panel, the previous display
will reappear.
5
Turn off the power of the VM System.
10
save your data perform the update check the version
Take the procedure of
Update B if the current
"System Version" is under
1.500.