UNI-T UTG1000 Series User Manual page 32

Carrier Wave Frequency Setting
Settable carrier wave frequency range is different of different carrier waveform. Default frequency of all carrier
wave is 1kHz. The frequency setting range of each carrier wave can be seen in the following table:
Carrier Wave
Minimum
Value
Sine Wave 1μHz
Square wave 1μHz
Ramp Wave 1μHz
Arbitrary
1μHz
Wave
Press Parameter→Frequencysoftkey in turn to set carrier wave frequency, then enter required numerical value,
and select unit.
Modulation Source Selection
This device can select internal modulation source or external modulation source. After enabling FM function, the
default of modulation source is internal. If need to change, press
30
UTG1020A
Maximum Minimum
Value Value
10MHz 1μHz
5MHz 1μHz
400kHz 1μHz
3MHz 1μHz
Frequency
UTG1010A
Maximum Minimum
Value Value
10MHz 1μHz
5MHz 1μHz
400kHz 1μHz
2MHz 1μHz
UTG1005A
Maximum
Value
5MHz
5MHz
400KHz
1MHz
UTG1000A Series