D-Link DCS-931L Quick Installation Manual page 6

Mount the Camera
Please refer to the steps below to assist you with mounting the camera.
4. Place the mounting base over the
holes that are in the wall. Make sure
to align the mounting base holes with
the holes in the wall. Use the supplied
screws to attach the mounting base to
the surface of the wall.
5. Place the base cover on the base. Make
sure to align the base cover notch, with
the mounting base for future removal.
Afterwards, reattach the camera head
onto the mounting base.
6. Adjust the angle of the camera as
desired, then tighten the collar on the
camera stem to lock it in place.
6
Do not overtighten screwheads as this may
crack the mount.
4
5
6
DCS-931L