Table of Contents
Advertisement
Run wash cycle
Brief instructions
A washing cycle proceeds in the following steps:
0 Check whether the water tap is opened.
0 Open the door, load the washing.
0 Shut the door.
0 Add washing powder/conditioner.
0 Set the correct washing program and temperature.
0 Press EASY-CARES button if required.
0 Pull out program selector.
Washing program starts automatically after six seconds.
0 Alter the final spin speed or select RINSE HOLD if required.
You can alter this setting and the temperature during the entire
washing cycle.
When the washing cycle has finished:
Important! If the washing cycle ended with Rinse Hold, before opening
the door, carry out a PUMP OUT, SPIN or SHORT SPIN.
0 Open the door, remove the washing.
0 Push in the program selector.
The washing machine is then switched off.
0 We recommend you unplug the appliance and turn off the water
supply when the wash program has finished.
Loading the washing
0 Sort and prepare washing according to type.
For information on correct preparation of the washing, see "Types of
3
washing and care symbols."
0 Open door: pull the handle of the door.
0 Load the washing.
Maximum load see "Program tables" in the
3
following chapter.
0 Firmly shut the door.
Caution! When closing the door do not catch any pieces of laundry!
Textiles or the appliance could be damaged.
18
All manuals and user guides at all-guides.com
Advertisement
Table of Contents
