Related Manuals for Hyundai HPVB20VSP-2B2A-1
Summary of Contents for Hyundai HPVB20VSP-2B2A-1
- Page 1 CORDLESS DRILL HPVB20VSP-2B2A-1 warning: read the following instructions before use the machine...
- Page 2 Safety instructions WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Page 3 hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
- Page 4 h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
-
Page 5: Proper Use
2) Safety instructions when using long drill bits a) Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. b) Always start drilling at low speed and with the bit tip in contact with the workpiece. - Page 6 Lpa sound pressure level..........86,9 dB(A) Uncertainty.KpA............3 dB Lwa sound power level..........97,9 dB(A) Uncertainty K...............3 dB Wear ear-muffs The impact of noise can cause damage to hearing. Total vibration values (vector sum of three directions) determined in accordance with EN62841: Impact drilling: 8,690 m/s²...
-
Page 7: Before Starting The Equipment
BEFORE STARTING THE EQUIPMENT Be sure to read the following information before you put the cordless screwdriver into operation: ▶ Charge the battery only with the charging unit supplied. ▶ Only ever use sharp drill bits and screwdriver bits which are suitable for the purpose and in faultless condition. -
Page 8: Operation
OPERATION Charging the battery Remove the battery pack by pressing the blue push lock buttons on front of the battery pack. Check that your mains voltage is the same as that marked on the rating plate. Plug the battery charger into the power socket. The green LED on the charging adapter then comes on. -
Page 9: Cleaning And Maintenance
Changeover switch The slide switch above the On/Off switch is for setting the direction of rotation of the cordless screwdriver and for preventing the cordless screwdriver from being switched on inadvertently. You can select between clockwise and counter clockwise rotation. To avoid causing damage to the gearing, the direction of rotation must only be changed when the screw- driver is at a standstill. - Page 10 DISPOSAL Electrical products should not be discarded with household products. According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling.
-
Page 11: Declaration Of Conformity (Ce)
BUILDER SAS ZI, 32, rue Aristide Bergès – 31270 Cugnaux – France Declare that the following tool: CORDLESS DRILL HPVB20VSP-2B2A-1 Serial number： 20210529481-20210530480 Is in conformity with the Directive « machine » 2006/42/EC Also in conformity with the following Directives:... -
Page 12: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 13: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 14: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...