Roland RG-7 Owner's Manual page 86

Chapter 5. User Program Registration
6
Press the [
"User Program to be loaded."
Display
User Memory
Ext Memory
7
Press the [Moving Key] (Enter) button.
8
Press the [Song] (Select -) button or [
"load User Program number" is flashing.
fig.
9
Press the [
number for the User Program to be loaded.
10
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
fig.
To return to the original screen without loading the User Program, press the
[Function] (Exit) button.
11
Press the [Function] (Exit) button so the indicator goes out.
The selected User Program is loaded to the RG-7.
84
] (Value -) button or [
Description
Loads User Programs saved in the User Memory.
Loads User Programs saved in USB Memory.
] (Value -) button or [
] (Value +) button to select the
] (Select +) button so that the
] (Value +) button to select the
NOTE
When calling up User
Programs saved in USB
memory, do not to remove
the USB memory from the
Ext Memory port until the
settings have been called
up.