Yamaha GRIZZLY 350 2016 Installation Manual page 93

TIP
An oil filter wrench is available at a nearby Yamaha
dealer.
6. Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
TIP
Make sure that the O-ring is properly seated.
1. O-ring
7. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 12 lb·ft)
8. Install the engine oil drain bolt and its new
gasket, and then tighten the bolt to the spec-
ified torque.
Tightening torque:
Engine oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
9. Refill with the specified amount of the recom-
mended engine oil.
8-14
1
8