Table of Contents
Advertisement
Names of Things and What They Do
Front Panel
fig.ME-20-front-panel.eps_70
15
1. Parameter Knobs
These adjust parameters selected with the effect buttons and EZ EDIT button.
You can check a parameter's current value by holding down its effect select button
and turning the knob (this displays the value without adjusting it).
You can change how the knobs respond when turned.
1.
Switch to Manual mode (p. 23).
2.
Hold down the [EDIT/EXIT] button and press Number Pedal 1.
One of the following appears in the display.
n0: The value changes immediately as the knob is turned (factory setting).
n1: The value changes once the knob is turned past the position
corresponding to the currently set value.
3.
Press [
4.
Press [WRITE]. The setting is saved, and the ME-20 returns to Manual mode.
1
2
4
16
][
] to change the value of the setting as desired.
3
6
10
12
7
8
11
5
9
14
13
7
Hide quick links:
Advertisement
Table of Contents
