Saving Tones (Write) - Boss ME-20 Owner's Manual

Saving and Calling Up Tones (Memory Mode)

Saving Tones (Write)

The steps you need to follow in order to save the patches you've created using the panel's
knobs and pedals in User memory is called the "Write procedure."
You can carry out the Write procedure in both Manual mode and Memory mode.
Carrying out the Write procedure results in the loss of any settings previously existing in the
targeted patch location (the save destination).
fig.ME-20-write.eps_55
1.
Press [WRITE].
The bank shown in the display and the pedal indicator flash to show the currently
selected patch bank and number are indicated.
2.
Select the save destination.
• Press [ ] [
• Press a number pedal (1–3) to select the number.
* To stop the Write procedure, press [EDIT/EXIT] to return to the previous mode.
3.
Press [WRITE] once more.
The sound is stored, and the ME-20 returns to Memory mode.
The display shows the bank, and the pedal indicators show the numbers.
24
2
] to select the bank.
2 1,3