Panel Descriptions - Boss RC-20 Owner's Manual

Panel Descriptions

Front Panel
1
LEVEL Knob
This knob adjusts the play volume of the
phrase.
* This knob does not adjust the input level from
the INST/MIC/AUX IN jacks or the volume of
the guide tone.
2
GUIDE Knob
This knob adjusts the volume of the guide
tone that sounds according to the tempo
while a phrase is being recorded or played.
LOOP QUANTIZE Indicator
This indicator lights when the Loop Quantize
function (p. 25) is activated.
3
PHRASE SELECT Knob
This knob selects the phrase track that will be
saved or played.
PHRASE USED Indicator
This indicator will light if a phrase has been
saved in the selected track.
MEMORY FULL Indicator
The indicator will light when the remaining
capacity of internal memory is getting low (p. 27).
If the remaining memory runs out while a
phase is being saved, this indicator will blink.
4
1 2 3
5 6 7
4
8 9
4
MIC Knob
This knob adjusts the input level from the
MIC jack.
INST Knob
This knob adjusts the input level from the
INST jack.
PEAK Indicator
This indicator will light when the level of the
input is excessively high.
5
REVERSE Button
Turn this button on (indicator lit) when you
want the phrase to play back in reverse (p. 21).
6
TAP TEMPO Button
This button is used to set the tempo or time
signature.
The indicator will light to indicate the current
tempo and time signature (red on the first
beat, green on subsequent beats).
• Tempo
Specify the tempo by the interval at which
you press the button (p. 24).
• Time signature
When you press and hold the button for two
seconds or longer, it will switch to time
signature setting mode. Then press the button